Vừa cắm con P500 vào PC thấy báo có phiên bản mới 2.3.3 LGEVN
Sau đây là hướng dẫn Update 2.3.3 bằng KDZ tool:
1.Bạn cần phải tải về firmware của thiết bị của bạn (Đông nam Á).
csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V20d_00/V20D_00.kdz
hoặc tải về firmware (Việt Nam)
csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/AVNMBK/V20g_00/V20G_00.kdz
2. Tải về KDZ updater từ đây và giải nén nó
http://www.mediafire.com/?t94t4hc6vfay59s
Sau đây là hướng dẫn Update 2.3.3 bằng KDZ tool:
1.Bạn cần phải tải về firmware của thiết bị của bạn (Đông nam Á).
csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V20d_00/V20D_00.kdz
hoặc tải về firmware (Việt Nam)
csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/AVNMBK/V20g_00/V20G_00.kdz
2. Tải về KDZ updater từ đây và giải nén nó
http://www.mediafire.com/?t94t4hc6vfay59s
3. Cài đặt msxml.msi từ thư mục không nén
4. Conect thiết bị của bạn (không bật lưu trữ đĩa, cho phép USBdebug) và chạy KDZ_FW_UPD.exe (Quyền Administrator).
5. Chọn Loại: 3GQCT
6. Chọn PhoneMode: DIAG
7. Trong phần KDZ file: Chọn các tập tin ROM mà bạn đã tải về trong bước đầu tiên
8. Nhấn Launch software update và chờ đợi (Nó sẽ là 10phút hoặc lâu hơn). Màn hình điện thoại của bạn sẽ xuất hiện "Emergency mode". Chờ cho đến khi nó khởi động lại.
Lưu ý : trong quá trình chạy lúc đầu sẽ thấy KDZ tự nhiên ko chạy nhưng ko sao cứ ngồi đợi khoảng 1 phút là nó sẽ tiếp tục chạy đến khi finish nhé. Máy sẽ tự tắt nhưng ko tự reboot nên phải reboot bằng tay nhé.
Mình đã test và thành công 100% nhé.
Ở phiên bản 2.3.3 này LG đã lược bỏ phần Update notifier và thêm phần Tải về
Về cảm nhận ban đầu là rất tốt. LG đã bỏ các phần không cần thiết như LG word , Game ...
Hi vọng các bạn sẽ thích phiên bản này.
Mình dùng thấy thích phiên bản Đông nam Á này (v20D) hơn bản cho Việt Nam( v20E)
Cả 2 bản tiếng Việt đều OK nhé.
Quảng cáo
Một điều thú vị là khi nân cấp xong toàn bộ phần mềm đã cài vẫn giữ nguyên, không phải cài lại. Và chúng đều hoạt động tốt trong môi trường 2.3.3 này.
Hướng dẫn Root:
1. Connect your phone with usb cables, make sure you have installed all the drivers needed, and connect phone in DEBUGGING Mode (provided a bit upper on this post)
2. In the extracted folder called root on your desktop, go to ADB folder and start cmd7.exe if u run win7 or cmdXP.exe (run as administrator in both options) if ur pc runs win XP. (your address bar should like something like this: C:\Documents and Settings\YOUR NAME HERE\Desktop\root\ADB
3. After starting cmd7 or cmdXP, type following commands
Code:
adb devices
Quảng cáo
then
Code:
adb shell
(symbol will change to $ or #) and copy paste following command into your terminal
Code:
echo 1 > /data/local/lge_adb.conf
4. After doing this, REBOOT YOUR PHONE
5. After reboot, go to root folder on desktop again, and start SuperOneClick.exe
6. Select GingerBreak method and press root button
7. After few seconds VOILA ....! You have rooted Optimus One.
8. REBOOT PHONE and update superuser app from market (mine was updated automatically)
I tried to root all kinds with android SDK and many others, and always had problems with force close. Running on this method for 3 days, and have no errors.