Thấy nhiều người đang sử dụng LG GW620 nhưng chưa có theaths nào hướng dẫn update firmware cho LG GW620 lên android 2.1 nên mình đăng bài hướng dẫn bằng tiếng anh trên trang http://openetna.com, bạn nào thử rồi thì comment nhé
http://openetna.com là website của 1 dự án muốn cung cấp một phần mềm mở cho GW620/KH5200 LG; hiện đang có một thử nghiệm Android 2,1 (trong phần download của http://openetna.com)
Chú ý nếu một số link ở dưới không hoạt động, hoặc sử dụng tài nguyên đã cũ, các bạn cứ vào trang http://openetna.com để tìm (nằm trong mục Download)
Một số hình ảnh lg gw620 chạy android 2.1 http://openetna.com/openetna/?page_id=28&show=gallery
http://openetna.com là website của 1 dự án muốn cung cấp một phần mềm mở cho GW620/KH5200 LG; hiện đang có một thử nghiệm Android 2,1 (trong phần download của http://openetna.com)
Chú ý nếu một số link ở dưới không hoạt động, hoặc sử dụng tài nguyên đã cũ, các bạn cứ vào trang http://openetna.com để tìm (nằm trong mục Download)
Một số hình ảnh lg gw620 chạy android 2.1 http://openetna.com/openetna/?page_id=28&show=gallery
Introduction http://code.google.com/p/openetna/wiki/Installation#Introduction
This document covers the flashing process of the current ROM. The steps described in this document use fastboot to flash the new system. fastboot is a debugging tool included in older LG firmwares.
Requirements http://code.google.com/p/openetna/wiki/Installation#Requirements
You will need:
- LG GW620
- Android SDK: http://developer.android.com/sdk/index.html
- Note: For windows, you need to add this to your android_winusb.inf in the android sdk usb driver in the [Google.NTx86] section for x86 or in [Google.NTamd64] section for 64bit windows:
[*]fastboot
- Linux: http://android-dls.com/files/linux/fastboot
- Windows: Included in android-sdk
Backup your data! (use software available from the market, or just sync with your google account, ...)
Quảng cáo
- Get your phone in fastboot mode:
- Remove battery
- Slide out the keyboard
- Plug in USB connector (still with the battery removed)
- Press SPACE (or SPACE+MENU for newer firmwares) just when you see the screen slightly light up, untill the fastboot text appears on the screen.
- If you are unable to enter fastboot, your firmware may not support it. See section "Recover fastboot"
- If you are flashing an 'OpenEtna' image for the first time, or if the ChangeLog says that you will have to do an wipe, issue the next commands (else skip this step). This will do something similar to a factory reset and remove all userdata. You can backup your apps and their data by the very fine app "Titanium Backup" (market). As root/admin, do: fastboot -w
- Flash the images. As root/admin, do: fastboot flash boot boot-versionXX-.img
fastboot flash system system-versionYY-.img- Wait until the commands finished
- Unplug the usb
- Reinsert the battery
- Poweron the phone
- Wait (On the first boot, the applications are optimized. This can take up to 10 minutes)
Update the keyboard layout http://code.google.com/p/openetna/wiki/Installation#Update_the_keyboard_layout
See HowToChangeKeyboardLayout
Install Google Appshttp://code.google.com/p/openetna/wiki/Installation#Install_Google_Apps
Download gapps-mdpi-20100930-signed.zip (google for it), copy it to your sdcard by
adb push gapps-mdpi-20100930-signed.zip /sdcard/gapps-mdpi-20100930-signed.zipand reboot.
Quảng cáo
Recover fastboot http://code.google.com/p/openetna/wiki/Installation#Recover_fastboot
If you have installed LG official v10I, v10N or some other version that does not have fastboot, you should downgrade using LG Utils and LG Mobile Update. (google for it)
Image with fastboot for 900 Mhz 3G: http://csmg.lgmobile.com:9002/swdata/WEBSW/GW620/ANEUBB/V10g_00/V10G_00.kdz
Image with fastboot for 850 Mhz 3G: http://csmg.lgmobile.com:9002/swdata/WEBSW/GW620/AORFBB/V10h_00/V10H_00.kdz
.